AMMO CAN FIRE PIT

For this project, I was tasked with outfitting an Ammo can with a propane burner inside. I started with affixing the burner inside the ammo can. I then drilled multiple holes in the back allow the propane line to be attached; while surrounding breather holes allow air to pass-through depending on the orientation. The stand itself was then drilled out to allow for weight savings - additionally, it can be inverted and the ammo can becomes nestled in between the legs for easy transport.

The stand was finished off with a final blending pass, a cutout in the rear for the air control, and coated with a fresh coat of Steel-It paint.