TOYOTA TACOMA 3RD GEN - ARB COMPRESSOR MOUNT
Utilizing the space behind your airbox, this bracket allows for an ARB or UpAir (dual or single) compressor to tuck away nicely in the back of the engine bay. There are options to mount the compressor fixed, as well as a set of slotted holes to allow for any fine tuning and or clearance.
The bracket mounts up utilizes the existing holes in the Toyota engine bay (2 holes) and 2 vertical studs behind the air filter box.
An additional hole is drilled within the bracket for the OEM mini horn to mount to with adequate room for the wiring to fit through.
The bracket is precious bent and is .188” thick steel to solidly mount the compressor.
*Hardware included for the firewall mounts as well as nuts for the OEM studs - ships in RAW finish
Utilizing the space behind your airbox, this bracket allows for an ARB or UpAir (dual or single) compressor to tuck away nicely in the back of the engine bay. There are options to mount the compressor fixed, as well as a set of slotted holes to allow for any fine tuning and or clearance.
The bracket mounts up utilizes the existing holes in the Toyota engine bay (2 holes) and 2 vertical studs behind the air filter box.
An additional hole is drilled within the bracket for the OEM mini horn to mount to with adequate room for the wiring to fit through.
The bracket is precious bent and is .188” thick steel to solidly mount the compressor.
*Hardware included for the firewall mounts as well as nuts for the OEM studs - ships in RAW finish
Utilizing the space behind your airbox, this bracket allows for an ARB or UpAir (dual or single) compressor to tuck away nicely in the back of the engine bay. There are options to mount the compressor fixed, as well as a set of slotted holes to allow for any fine tuning and or clearance.
The bracket mounts up utilizes the existing holes in the Toyota engine bay (2 holes) and 2 vertical studs behind the air filter box.
An additional hole is drilled within the bracket for the OEM mini horn to mount to with adequate room for the wiring to fit through.
The bracket is precious bent and is .188” thick steel to solidly mount the compressor.
*Hardware included for the firewall mounts as well as nuts for the OEM studs - ships in RAW finish